Home > PRODUCTS > UV germicidal lamp > Standard Output Germicidal Lamps
Product List
Lightbest 80W 16678 Equivalent Replacement Ultraviolet Lamp Single Pin

Product introduction:

Lightbest 80W 16678 Equivalent Replacement Ultraviolet Lamp Single Pin
  • Details
  • Technical Data

 Lightbest 80W 16678 Equivalent Replacement Ultraviolet Lamp Single Pin

 

Product Description:

Watts:80 Watts

Length:762 mm

Base Description:1 Single Pin Double Ended 

Qtz. OD:15 mm

Output:Standard

Category:Instant Start

Type:VH 185nm

 

 

Product Features and Advantages:

Lightbest's 80W Uv Germicidal lamp is perfect replacement for the 16678 UV lamp for water disinfection systems. Made from high-quality quartz containing less than 1 ppm hydroxy (-OH)  . They are widely used in both new installation and replacement in water treatment UV system, offering reliable quality, stable performance, and an excellent value. Lightbest also offers door-to-door delivery services from our factory to global customers based on DDU or DDP term. CE, FCC, EPA, and MSDS certifications and documentation are also available to your need.

 

UV-16678.jpg

 

1针 .jpg

 

Stardard Output Germicidal Lamps
"Lightbest manufacture UV germicidal lamps with two types of high-quality fused quartz, including doped fused quartz type and clear fused quartz, which emit different wavelength of UV energy.
Ozone-free (L) lamps, made with doped fused quartz which blocks the transmission of 185nm energy, emit approximately 95% of the ultraviolet energy at the mercury resonance wavelength of 253.7nm. This wavelength is the region of maximum germicidal effectiveness and is highly lethal to virus, bacteria, protozoa and mold.
Very-High (VH) ozone generating lamps, made with nature clear fused quartz which can transmit 185nm and 253.7nm UV energy. 185nm can not kill bacterial or virus directly, however, it can produce abundant of ozone (O3) from oxygen (O2) in air. Ozone can break cell walls of microbial so that immediately kill microorganism acting as strong oxidizers and deoxidizers."


Typical Germicidal Lamps' Configurations:
Preheat Start germicidal lamps are operated by a preheat start circuit that employs a relatively compact and economical ballast. The preheat circuit requires four electrical connections per lamp and a slight to moderate delay is needed to start the lamp. Some modern electronic ballasts are capable of instant starting a preheat lamp, or available by changing the circuit.
These germicidal lamps are extensively applied in water treatment, air purification and surface sterilization.
Instant Start germicidal lamps are instant starting and utilize a coil filament on each end which operates hot cathode. Lamp life is determined by the life of the electrodes and is affected by the frequency of starting.
These germicidal lamps are extensively applied in air purification and duct systems (such as HVAC).

Watts:80 Watts

Length:762 mm

Base Description:1 Single Pin Double Ended 

Qtz. OD:15 mm

Output:Standard

Category:Instant Start

Type:VH 185nm