Home > PRODUCTS > UV germicidal lamp > Standard Output Germicidal Lamps
Product List
Lightbest 21W Uv Germicidal Lamp Equivalent Replacement DB 21 for Water Disinfection System

Product introduction:

Lightbest 21W Uv Germicidal Lamp Equivalent Replacement DB 21 for Water Disinfection System
  • Details
  • Technical Data

 Lightbest 21W Uv Germicidal Lamp Equivalent Replacement DB 21 for Water Disinfection System

 

Product Description:

Model:GPH436T5L/4P

Lamp Diameter: 15mm

Wavelength: 253.7nm

Lamp Wattage: 21W

Lamp Current: 0.425A

UV Output at 1 meter: 72μW/cm²

Rated Lifespan: 9000 hours

 

Product Features and Advantages:

Lightbest's 21W Uv Germicidal lamp GPH436T5L/4P is perfect replacement for the DB 21 UV lamp for water disinfection systems. Made from high-quality quartz containing less than 1 ppm hydroxy (-OH)  . They are widely used in both new installation and replacement in water treatment UV system, offering reliable quality, stable performance, and an excellent value. Lightbest also offers door-to-door delivery services from our factory to global customers based on DDU or DDP term. CE, FCC, EPA, and MSDS certifications and documentation are also available to your need.

 

5模板.jpg

4针4_副本.jpg

 

 

 

Stardard Output Germicidal Lamps
"Lightbest manufacture UV germicidal lamps with two types of high-quality fused quartz, including doped fused quartz type and clear fused quartz, which emit different wavelength of UV energy.
Ozone-free (L) lamps, made with doped fused quartz which blocks the transmission of 185nm energy, emit approximately 95% of the ultraviolet energy at the mercury resonance wavelength of 253.7nm. This wavelength is the region of maximum germicidal effectiveness and is highly lethal to virus, bacteria, protozoa and mold.
Very-High (VH) ozone generating lamps, made with nature clear fused quartz which can transmit 185nm and 253.7nm UV energy. 185nm can not kill bacterial or virus directly, however, it can produce abundant of ozone (O3) from oxygen (O2) in air. Ozone can break cell walls of microbial so that immediately kill microorganism acting as strong oxidizers and deoxidizers."

 

Typical Germicidal Lamps' Configurations:
Preheat Start germicidal lamps are operated by a preheat start circuit that employs a relatively compact and economical ballast. The preheat circuit requires four electrical connections per lamp and a slight to moderate delay is needed to start the lamp. Some modern electronic ballasts are capable of instant starting a preheat lamp, or available by changing the circuit.
These germicidal lamps are extensively applied in water treatment, air purification and surface sterilization.
Instant Start germicidal lamps are instant starting and utilize a coil filament on each end which operates hot cathode. Lamp life is determined by the life of the electrodes and is affected by the frequency of starting.
These germicidal lamps are extensively applied in air purification and duct systems (such as HVAC).

2.jpg

Model:GPH436T5L/4P

Lamp Diameter: 15mm

Wavelength: 253.7nm

Lamp Wattage: 21W

Lamp Current: 0.425A

UV Output at 1 meter: 72μW/cm²

Rated Lifespan: 9000 hours