lDimensions

lWiring diagrams

PL1-425-90
PL1-425-90A
1*Lamp Type: GPH1148T5 GPH1554T5 GPH1630T5 TUV64T5 G48T5L G64T5L G67T5L
Wiring Diag：C

PL1-800-100
PL1-800-100A
Lamp Type: GPH436T5HO GPH846T5HO GPH893T5HO GHO36T5L TUV36T5HO TUV55WHO
TUV75WHO
Wiring Diag：C

Technical specifications
Mains Frequency:50/60Hz
Power Factor: >0.55
Efficiency: >90%
Operating Frequency: 40-70KHz
Starting：Instant
Dimensions: 215*44*26mm
Input line length：430mm
Output line length：630mm
Signal line length：630mm

Installation requirement
Wire Gauge：0.5-1.0mm²
Max.cable length between ballasts and lamp：5m
LDE specification：VF=1.8-3.6V IF =20-50mA

Mounting Restrictions
Disconnect Input Power Before Installing or Servicing.
Ballast Case Must Be Grounded.
Don’t short any two wires of the four outputs.
The yellow wire must be insulated when driving a lamp.

For applications with less than one switch-on cycle per day
（other otherwise preheat start ballasts are recommended）
Lamp filament must be suitable for instant start operation，ask lamp manufacturer.

Features
Lamp status indication via DC signal output.
DC3~6V 5mA：lamp on. DC 0V：lamp fault or on lamp. Connect LED.

Applications
All areas of applications include UV lamps
Air purification
Aquarium
Industrial water treatment
Kitchen purification